PTFE/Silicone Septa: (T/S) High quality, pure silicone is laminated to 0.005” thick PTFE to give a pure, highly inert septum with excellent resealing characteristics even after repeated punctures. PTFE/Silicone septa are the preferred product for use in most HPLC and GC applications where resealability and high purity are critical.
PTFE/Butyl (Pharma Fix Septa) Aluminum Cap N9306224 PTFE/Red Rubber (red) Aluminum Cap, Star Spring and Septa N9304147 N9302978 PTFE/Silicone (white) Aluminum Cap, Star Spring and Septa N9304146 B4000022 PTFE/Silicone (white) Low Bleed Aluminum, Skived Pressure Relief N9302975 PTFE/Silicone (white) Low Bleed Aluminum, Skived (non-Pressure
Mar 17, 2022 · Amber borosilicate glass protects light-sensitive samples from UV light. Sealed Design: Unique threaded design and polypropylene nut with precision-fit septum ensure consistent sealing, non-volatile. REUSABLE: The 2ml HPLC vials included blue ABS Screw Cap and Septa (Red PTFE/White Silicone Liner).
the solvent. PTFE/Silicone septa are ideal for use in most HPLC and GC applications where resealability and purity are critical. Pre-slit PTFE/silicone septa Pre-slit septa are offered in many of the same formulations as for non-slit PTFE/silicone septa and shares most of the physical and chemical characteristics.
The C&G 40 mL precleaned VOA (volatile organic compound) vial is mainly used in research laboratories or in chemical industries. It is suitable for use with autosamplers, solid cap and liners for analysis. This L3 vial comes with a 24-414 white PTFE septa cap which offers tight sealing of sample. Compare this item.
The commonly used PTFE/silicone HS septa are typically specified for use up to 200 °C, because at high temperature (>200 °C), septum contaminates begin to dramatically leach out of the silicone layer. A series of siloxane peaks are detectable when using PTFE/silicone HS septa at high temperature. The intensity of the siloxane peaks increases
PTFE/ High-performance red rubber septa -40 +110 -40 +230 PTFE/Silicone septa: (T/S) -60 +200 -76 +392 PTFE/Silicone/PTFE septa: (T/S/T)* -60 +200 -76 +392 PTFE septa* -200 +250 -328 +482 Butyl/Chlorobutyl/Bromobutyl stopper or septa -20 +125 -4 +257 Gray PTFE/Red rubber -40 +120 -40 +248 PTFE/White silicone purepack septa -60 +200 -76 +392
Used primarily for routine analysis in gas chromatography. Offers moderate ability to reseal and good chemical inertness. Not recommended for multiple injections or holding samples for further analysis. PTFE is protective layer that once broken exposes rubber to chemical attack. Types of rubber septa.
The 11mm snap-top caps are made of high-quality polypropylene. The caps have a roll-edge or snap-on shape. The snap-top caps provide a secure seal that minimizes evaporation even for volatile samples. PTFE/silicone septa are the product of choice for most HPLC and GC applications where resealability and high purity are critical.
Analytical Vials. Vials play a significant role in analytical analysis and result reproducibility. Vials must be inert and free of extractables or leachables to prevent affecting results. Using certified, application-specific, contaminant-free vials can significantly reduce risk. We offer a broad spectrum of Supelco ® products including
Jul 11, 2023 · Yes, Pre-slit PTFE/Silicone Septas are commonly used in headspace analysis, which is a technique used for the analysis of volatile compounds in samples. The chemically inert nature of these septa
Cap / Septa are of the best quality and provides inertness for wide range of sample use. Septa Comes with normal, bonded and bonded preslit option to work on different auto samplers. HPLC / GC Compatible – NA. Vials Quality – USP type 1 class A, 33 Expansion or 51 Expansion. Cap – PTFE lined Cap. Septa – PP transparent. Stopper – PP
Mar 31, 2022 · PTFE disk septa. A solid disk 0.010″ thick, our PTFE stands better than the most aggressive solvents. At least when it comes to chemical inertness. Most standard gauge metal HPLC needles can penetrate the thin membrane. Do not use PTFE septa with the following because you can’t release PTFE septa: 1. volatile solvents, 2. fast cycle periods,
A specially moulded seal with a PTFE insert. Sealing surface of Butyl and PTFE affects a more positive seal than non-PTFE-faced septa. Ideal choice for temperatures below 125°C. Good sealing characteristics, excellent resistance to most solvents with reduced coring and high puncture tolerance.
These septa often emit specific volatile organic compounds (VOCs) confounding the measurement results of breath samples. In the current paper, 14 different brands of magnetic caps with silicone–polytetrafluoroethylene (PTFE), butyl–PTFE, or butyl rubber septa were tested. The total emission of septa over a 4 h period was also evaluated.