Aijiren 2 mL crimp top vials are constructed from Type 1 borosilicate glass, with low metal content, to protect your sample from destabilizing or leaching. Our associated crimp caps come with a choice of either PTFE/silicone, PTFE only, natural red rubber, butyl, or PTFE/butyl septum materials. Our 2 mL crimp top vials and 11 mm crimp caps are the perfect fit for HPLC and GC instrument platforms across a wide variety of applications, including pharmaceutical, environmental, energy and fuels,
Always have enough vials and closures readily available for your analysis. These convenience kits hold 100 2 mL Clear Screw Top Vials and 100 preassembled Blue Caps with PTFE/Red Rubber Septa together in an environmentally clean, re-sealable clamshell pack.
2 mL, 11 mm Crimp Top Amber Vial with Write-on Patch and Fill Lines. PerkinElmer. All our vials are packed in a clean environment to ensure you receive contaminant free product every time. Volume: 2 mL Size: 12 x 32 mm I.D.: 11 mm Finish: Crimp Top Description: Amber glass with write-on patch and fill lines.
Part Number: . Vial convenience pack, screw top, amber vials with write-on spot, green caps, certified, PTFE/red rubber septa, 500/pk. Vial size: 12 x 32 mm (12 mm cap) Add to Favorites. + Create New list. Item successfully added to your list.
Butyl Rubber Stopper for 20mm Crimp Vials Pre-slit PTFE/Silicone Septa 20mm Crimp Top Aluminum Caps 9mm Short Thread Caps with Septa Screw Caps with Septa for 8-425 Screw Neck Vial 10-425 Screw Caps with Septa 11mm Crimp Top Caps with Septa 11mm Snap Top Caps with Septa 13-425 Thread Caps with Septa 20mm Crimp Top Magnetic Aluminum Caps with Septa 18mm Screw Thread Headspace Caps with Septa 15
The vials use certified crimp caps with PTFE/silicone septa to ensure your autosampler operates seamlessly. The glass sample vials require aluminum caps for sealing, which are relatively inexpensive, and when properly clamped, they provide the best seal for long-term storage. The crimp cap cannot be reused. The septa and cap for crimp top
2 mL Screw Top Vials & Screw Caps. Aijiren 2 mL screw top vials are constructed from from Type 1 borosilicate glass, with low metal content, to protect your sample from destabilizing or leaching. Our 2 mL screw glass vials are available in both amber and clear. The associated 9 mm screw caps and closures come with your choice of septa.
Volume:2 mL Size: 12 x 32 mm I.D.: 11 mm Finish: Crimp Top Cap with Closure Kit Description: Clear glass PTFE/Red Rubber septa with aluminum cap This convienence kit is also Compare this item 2 mL, 11 mm Crimp Top Vial with PTFE/Silicone Closure- Kit
2 ml Crimp Vial with pre-crimped. aluminium seal having a. PTFE/Rubber Septum, Nitrogen. purged, clear borosilcate glass. Size 12 x 32 mm. 2 ml Crimp Vial with pre-crimped. aluminium seal having a. PTFE/Rubber Septum, Nitrogen. purged, amber borosilcate glass. Size 12 x 32 mm *replace „x“ with: B= blue, G = green, P = pink, W = white, Y
9mm 2ml Short Tread HPLC Autosampler Vial 8-425 2ml Screw Neck HPLC Autosampler Vial 11mm Crimp Top 2ml Autosampler Vial 20mm Crimp Top Headspace Vials 18mm Screw Headspace Vial. EPA VOA TOC COD Vials. 15-425 Screw Sample Storage Vial 15-425 Thread Caps with Septa 40ml TOC Vial 16mm COD Digestion Test Tube Glass Test Tube with Screw Cap 13mm
Volume-Aijiren Vials for HPLC/GC. 11mm Snap Neck Glass Vial with Cap and Septa. Aijiren 2ml snap neck has 40% lager target area which makes it much safer for the autosampler needle. Snap vials can be closed with either snap caps or crimp caps. Snap cap vials cannot be pressurized, but can be easy as push-on, pull-off by hand.
Deactivated Wide Opening Crimp Top Vials Aijiren Technologies area for improved autosampler needle accuracy. 2 mL vials measure 12 x 32 mm. Outer diameter of the crimp head is 11 mm. Tightly controlled crown improves crimping. Uniformly flat bottom ensures compatibility with inserts. Deactivation process eliminates sample interactions.
Our 2 mL screw glass vials are available in both amber and clear. The associated 9 mm screw caps and closures come with your choice of septa constructed from either PTFE silicone or natural red rubber. Our screw top vials and screw caps are the perfect fit for HPLC and GC instrument platforms across a wide variety of applications, including pharmaceutical, environmental, energy and fuels, forensics, materials science, biopharmaceutical, proteomics, and metabolomics.
Crimp top vial convenience kit with PTFE/red rubber septa, volume 2 mL, clear glass vial, vial O.D. × H × I.D. 12 mm × 32 mm × 6 mm, silver aluminum seal, PTFE/red rubber aluminum seal, pkg of 100 ea
Dimensions Finish Total Volume Color Cap Septa Material. PTFE/ Silicone/PTFE PTFE/Silicone 12 x 32 mm 11 mm 2.0 mL Clear and Amber PTFE/Rubber Inserts for 9-425 Screw-Tops Vials 11 mm Crimp-Top PTFE Inserts for 9-425 Screw-Tops Vials