Dual support screens allow for flow in both directions. Assemble holders quickly and efficiently without membrane tears with the specially designed inlet cap and exterior lock. Maximum operating pressure is 71 psi (4.8 bar). The 47-mm holder features a 1/4" NPT (M) on the inlet and outlet. Also has a female luer-slip fitting included.
Sterlitech ceramic membrane disc holders are designed for use with either 47 or 90 mm ceramic membranes. These dead-end style ceramic membrane disc holders are used with a pressure tank. Standard ceramic membrane disc holder (47mm or 90mm) Crossflow/Tangential flow ceramic membrane disc-holder (90mm) Stainless Steel (316) Pressure Filtration. SKU.
COBETTER Reusable Membrane Filter Holder Polypropylene for 47mm Membranes, Can Connect to A Syringe, 1 pcs/Pack . Visit the COBETTER Store. $49.00 $ 49. 00.
30 psi. Pre filter size. 35 mm (47 mm if membrane and mesh separator) This 47mm in-line holder (Model IFH47) is available in both type 304 or 316 stainless steel. The PTFE coated support screen prevents sticking of the membrane during autoclaving. The back-pressure support screen protects the filter from rupture during reverse pressure surges.
All stainless steel can rust over time. It should be washed with DI water and dried thoroughly immediately after each use. Why are there two stainless steel screens required under the membrane filter of the 47mm ss filter Holder XX4404700? The photo-etched support (catalog number XX4204709) is used to support the membrane during filtration.
Membrane Filter Holder 47mm Polysulfone (PSF) filter holders have an upper chamber and a receiver.Choose from 250- or 500-mL upper chambers and either 250-,500-, or 1000-ml receivers (all are graduated in 50-ml increments). Holders accept 47-mm diameter membranes.Transparent polysulfone (PSF) is autoclavable,break-resistant and nontoxic.
Whatman 1960-004, 47MM glass membrane Filter holder 1/PKWhatman 1960-004, 47MM glass membrane Filter holder 1/PKWhatman product code 1960-004Diameter or Size L X W47 mmHousing ConstructionglassPack Size1
These holder ARE AVAILABLE IN SIX DIFFERENT SIZES TO HOLD 47 MM, 90 MM, 142 MM, AND 293 MM diameter membrane filters. The membrane holders in combination with membrane filter are used for sterile filteration of pharmaceutical and biological solution. On a production scale either a 293 mm or a 142 mm diameter holder is used The selection of the
Upstream threaded vent on 47 mm holder allows release of trapped gas during liquid filtration. Convenient in-line opening and closing capability. “Pall Laboratory products are designed for laboratory applications only. This product is not approved for use in medical, clinical, surgical or other patient applications.
PFA IN-LINE FILTER HOLDERS : 47 mm PFA Filter Holder : Filter Membrane Size : 47mm diameter: Diameter : 67mm: Maximum Pressure : 25 psi: Maximum Operating Temperature : 100°C: Inlet/Outlet Compression Fitting : Female ¼" NPTM or ¼" (6.35mm) diameter tubing: Filter Area : 12.5 cm 2: Height : 70mm: Weight : 5.2 oz. (120g) 90 mm PFA Filter
Filter Holders. Filter holders are necessary for various filtration by using membranes, cellulose fiber filters and glass fiber filters. Holders are categorized two types by methods of vacuum or pressure filtration.
This item: Advantec 662322 Polypropylene Filter Holder for 47-mm membranes $65.09 SimPure MCE Micro Disc Membrane Filter, Sterile Gridded Individual Pack, 47mm Diameter and 0.45um Pore Size Hydrophilic Filter Paper, Pack of 100 $23.99 ($0.24/Count) Omicron 133047 Borosilicate Glass Fiber Binder Free Filter, 1.2 μm, 47 mm (Pack of 100)
Membrane Dryer Compressed Air Dryers, Beverage & Snack Vending Keypads&Membranes, 25 mm Outer Diameter Syringe Filters, 13 mm Outer Diameter Syringe Filters, Unbranded 25 mm Outer Diameter Syringe Filters, Hemostats Holders, Business Card Holder Business Card Holders, Indicator Holders & Bases,
Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The 47mm holder is the standard size for microbiology and uses a 47mm filter membrane. The anodized aluminum clamp secures the membrane between the funnel and glass
Polycarbonate Track-Etched Membrane Filters / 0.2 µm / 47 mm Discs. Item no. 23007--47------N. $185.00. These hydrophilic polycarbonate track-etched filters are manufactured from high quality polycarbonate film using track-etch technology. They have a sharply defined pore size of 0.2 µm with a pore density of 5.0E+08 cm².