Comprising of a 300ml capacity funnel, support base and metal clamp, this popular size filter holder is designed to be used with 47mm membrane filters. The three components of this product must be ordered separately. With sintered glass disc to support 47mm diameter membranes All borosilicate glass liquid pathway to avoid sample contamination
High Quality, Corrosion-Resistant Holders for Stack Sampling Stainless steel construction offers excellent chemical resistance. Holders open and close easily. Filter remains undisturbed for particulate analysis. Upstream threaded vent on 47 mm holder allows release of trapped gas during liquid filtration.
This allows for ease of use without damaging or tearing membranes. Suitable for use with liquids and gases these holders feature a maximum operating temperature (liquids) of 176°F (80°C). The 25-mm holder has a maximum operating pressure of 42 psi (2.9 bar) and 71 psi (4.8 bar) for the 47-mm holder. Both are autoclavable.
Polycarbonate Track-Etched Membrane Filters / 0.2 µm / 47 mm Discs. Item no. 23007--47------N. $185.00. These hydrophilic polycarbonate track-etched filters are manufactured from high quality polycarbonate film using track-etch technology. They have a sharply defined pore size of 0.2 µm with a pore density of 5.0E+08 cm².
In-Line Filter Holder 47 mm: Background Information: In-Line Filter Holders are commonly use to ultraclean liquids or gases in line by pressure filtration. Simply open the housing to change the filter without disturbing the attached plumbing. Features & Benefits: •Stepped hose barb connections at both ends for easy installation
It may be autoclaved with filter in-place, if PTFE-coated support screens, XX44 047 02 and XX44 047 04, are used. Holder XX45 047 00 may be equipped with an upstream filter support screen, XX45 047 04, for back-pressure. protection of filter. 47 mm high pressure filter holder, XX45 047 00.
Product Name. Qty. Filter Holder Set with Fritted Glass Support Base, 47mm SKU : FHFT47. $208.24. Filter Holder Set with PTFE Coated Funnel and Support Base, 47mm SKU : FHPT47. $260.30. Filter Holder Set with Stainless Steel Screen and Support Base, 47mm SKU : FHSS47. $237.16. Replacement Glass Funnel, 300ml SKU : FHGF300.
Jan 31, 2022 · Assemble holders quickly and efficiently without membrane tears with the specially designed Inlet cap and exterior lock. Maximum operating pressure is 71 psi (4.8 bar). the 47-mm holder features a 1/4 inch NPT) on the Inlet and Outlet. Also has a female LUER-SLIP fitting included. Autoclavable. Product details
SimPure MCE Micro Disc Membrane Filter, Sterile Gridded Individual Pack, 47mm Diameter and 0.45um Pore Size Hydrophilic Filter Paper, Pack of 100. 4.5 out of 5 stars. 36. 1 offer from $23.99. Advantec MFS 43303020 Model PP25 Syringe Filter Holder, 47 mm Diameter, Polypropylene. 5.0 out of 5 stars. 1.
Whatman 1960-004, 47MM glass membrane Filter holder 1/PKWhatman 1960-004, 47MM glass membrane Filter holder 1/PKWhatman product code 1960-004Diameter or Size L X W47 mmHousing ConstructionglassPack Size1
30 psi. Pre filter size. 35 mm (47 mm if membrane and mesh separator) This 47mm in-line holder (Model IFH47) is available in both type 304 or 316 stainless steel. The PTFE coated support screen prevents sticking of the membrane during autoclaving. The back-pressure support screen protects the filter from rupture during reverse pressure surges.
Membrane support - PES; Syringe fi lter - PTFE; Receiver fl ask - Borosilicate glass; Drain hose - Rubber (non-autoclavable) Specification : Funnel capacity： 300 ml; Flask capacity： 1000 ml; Filter diameter： 47mm / 50mm; Effective filtration area ： 13.1 cm²; Port thread (I.D. tubing)： 5/16 inch (8mm) Syringe filter : 25 mm, 0.2 μm
Filter holder is equipped with a back-pressure support screen. Filter holder be autoclaved with filter in-place when PTFE-coated support screens are used. Stainless filter holder may also be equipped with an upstream filter support screen for back-pressure protection of filter. Fits 47mm diameter membrane filters.
The holder’s high pressure rating readily handles the highest bubble-point membrane filters. The holder can easily be daisy-chained in series. Non-threaded connections prevent contaminant build-up, and facilitate cleaning. The holder can be autoclaved, in-line steam sterilized, or hot water sanitized with filter in place. Design Features
Classic Glass Filter Holders - Kit 47 mm, PTFE-coated membrane support, 300 mL funnel The Classic Glass Filter Holder is an essential tool for every research lab. The holder′s multipurpose design is appropriate for a variety of applications and is available in three different support materials for compatibility with your specific application