Syringe Filter, GD/X, GF, 25 mm, 1,50 µm, 150/pk. The GD/X line is specially designed for samples with high particle content. The housing made of pigment-free polypropylene eliminates sample contamination in these filters. Whatman GMF 150 pre-filter layers (staggered media density) and GF/F glass microfiber media also allow for the filtration
Jan 27, 2006 · Finally, we removed the glass slide from the SAM covered sample and found a largely reduced magnitude of the cavity mode redshift over time by up to a factor of 3 (Fig. 4, red triangles) compared to untreated PCM reference devices (Fig. 4, blue dots). This demonstrates a partial surface passivation once a SAM is attached.
Glass Fiber Filters Without Binders These filters are composed of borosilicate microfiber glass without binder resin and are used for environmental, gravimetric, and biochemical applications. They retain structural integrity without weight loss when ignited to 550 °C after sample filtration.
Glass Fiber Filters without Binder Resin: The filters without binder resin retain their structural integrity without weight loss when heated up to 500 °C and can therefore be used in gravimetric analysis as well as for the filtration of hot gases. Type APFA •Retains fine particles with good efficiency, even at high flow rates
Syringe Filter, GD/X, GF, 25 mm, 1,50 µm, 150/pk. The GD/X line is specially designed for samples with high particle content. The housing made of pigment-free polypropylene eliminates sample contamination in these filters. Whatman GMF 150 pre-filter layers (staggered media density) and GF/F glass microfiber media also allow for the filtration
The prefilter contains a high-efficiency borosilicate glass filtration stack that will retain fine particles down to 0.7 μm, allowing difficult sample filtration with less hand force. It reduces the need for multiple syringe filters by processing three to seven times more sample volume than syringe filters without prefilters.
A typical solvent filtration apparatus is depicted in Figure 2. These traditional filtration systems can sometimes be challenging to manipulate within the laboratory, and as they are constructed from glass they can easily be broken. Contamination concerns from the filtration apparatus may also deter many analysts from filtering solvents.
Plasma volume – The amount of plasma generated from lateral filtration through a membrane varies depending on the polymer type. The two most commonly used substrates for plasma generation are asymmetric polysulfone and glass fiber. Glass fiber materials typically generate less plasma per microliter of blood than other materials.
Advantec MFS A045H047W Membrane Filter without Pad, Sterile, Grid, 47 mm Diameter, Mixed Cellulose Esters (Pack of 1000),White 5.0 out of 5 stars 1 $376.41 $ 376 . 41 ($0.38/Membrane Filter)
Anopore inorganic membranes, supplied as Anodisc membrane filters, are aluminum oxide membranes that facilitate precise filtration. Order Product. ID. Product Name. 28420419. Anodisc Circle Without Support Ring, 0.02 µm pore size, 13 mm (100 pcs) 28420414. Anodisc Circle Without Support Ring, 0.02 µm pore size, 47 mm (50 pcs) 28420420.
Alumina oxide membrane filters are non-toxic and compatible with most solvents and aqueous solutions. The precise, nondeformable, honeycomb pore structure eliminates lateral crossover between pores, ensuring exact filter cut-offs and a narrow pore size distribution.
Glass Fiber Filter without binder, 1.0 µm pore size, hydrophilic glass fiber, 37 mm diameter 1.0 μm pore size Page 1 of 2 Membrane Filter Characteristics Chemical Compatibility: The filter material must be compatible with the chemical nature of the substance being filtered to avoid structural failure.
Efficiently perform purification of high quality plasmid DNA or PCR products with the Aijiren Tech™ Nunc™ 96 Deep Well Filter Plates. Made of chemical resistant polypropylene material with superior mechanical strength, these plates conform to standard 96 well footprint compatible with high throughput sample processing. Catalog Number 278010
Cytiva's Whatman™ GF/F Glass Fiber Filters Cytiva's Whatman™ high efficiency Grade GF/F glass microfiber filter will retain fine particles down to 0.7µm. Unlike membrane filters with a comparable retention value it has a very rapid flow rate with a high loading capacity.
